Filter
Top Products
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 6025B-
3/6025B-3R. Installation and maintainance should be performed by experienced
technicians only.
The SuperServer 6025B-3/6025B-3R is a high-end server based on the SC825TQ-
560LP/SC825TQ-R700LP 2U rackmount chassis and the X7DB3, a dual processor
serverboard that supports single or dual Intel® quad-core Xeon® 5400/5300 Se-
quence processors or dual-core Xeon 5000/5100 Sequence processors at a Front
Side (System) Bus speed of 1333/1066/667 MHz and up to 32 GB of FBD ECC
DDR2-667/533 SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X7DB3 serverboard and the
SC825TQ-560LP/SC825TQ-R700LP chassis, which comprise the SuperServer
6025B-3/6025B-3R.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6025B-
3/6025B-3R into a rack and check out the server confi guration prior to powering
up the system. If your server was ordered without processor and memory com-
ponents, this chapter will refer you to the appropriate sections of the manual for
their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.