Filter
Top Products
6-4
SUPERSERVER 6025B-3/6025B-3R User's Manual
Figure 6-2. Removing a System Fan
6-4 Drive Bay Installation/Removal
Accessing the Drive Bays
SAS Drives: You do not need to access the inside of the chassis or remove power
to replace or swap SAS drives. Proceed to the next step for instructions.
Note: You must use standard SAS drives in the SuperServer 6025B-3/6025B-3R.
DVD-ROM/Floppy Disk Drive: For installing/removing the DVD-ROM or fl oppy disk
drive, you will need to gain access to the inside of the server by removing the top
cover of the chassis. Proceed to the "DVD-ROM and Floppy Drive Installation"
section later in this chapter for instructions.
3.5" Drive Bay: For installing/removing a component in the 3.5" drive bays, proceed
to the "3.5" Drive Bay Installation" section later in this chapter for instructions.