Suunto D6I Scuba Diving Equipment User Manual


 
As a result, the allowed no-decompression-stop limits are considerably reduced.
10.3. Oxygen exposure
The oxygen exposure calculations are based on currently accepted exposure time
limit tables and principles. In addition to this, the dive computer uses several methods
to conservatively estimate the oxygen exposure. For example:
The displayed oxygen exposure calculations are raised to the next higher percent-
age value.
The CNS % limits up to 1.6 bar are based on 1991 NOAA Diving Manual limits
The OTU monitoring is based on the long-term daily tolerancelevel and the recovery
rate is reduced.
Oxygen related information displayed by the dive computer is also designed to ensure
that all warnings and displays occur at the appropriate phases of a dive. For example,
the following information will be shown before and during a dive when the computer
is set in NITROX mode:
The selected O
2
% on the alternative display
OLF% alternative display for either CNS% or OTU% (whichever is larger)
Audible alarms are given and the OLF value starts to blink when the 80% and
100% limits are exceeded.
Audible alarms are given and the actual PO
2
value blinks when it exceeds the
preset limit.
In dive planning, the maximum depth according to the O
2
% and maximum PO
2
selected
118