Filter
Top Products
6. DIVING
This section contains instructions on how to operate the dive computer and interpret
its displays. The dive computer is easy to use and read. Each display shows only the
data relevant to that specific diving mode.
6.1. Diving in the AIR mode (DIVE Air)
This section contains information on diving with standard air. To activate the DIVE Air
mode, please refer to Section 5.10.1. Accessing DIVE mode.
DIVE HAS JUST BEGUN AND
AVAILABLE NO-DECOMPRESSION
TIME IS OVER 99 MINUTES SO NO
VALUE IS DISPLAYED.
NOTE
The dive computer will remain in the SURFACE mode at depths
less than 1.2 m/4 ft. At depths greater than 1.2 m/4 ft the instru-
ment will go into the DIVE mode automatically. However, it is re-
commended that you activate the SURFACE mode manually
before entering the water in order to perform the necessary dive
pre-checks.
NOTE
The default fields shown on your dive computer in the DIVE mode
are the ones you select while in the SURFACE mode.
69