Filter
Top Products
•
Sample rate (see
3.21 Sample rate
)
•
Deepstop (see
3.20 Safety stops and deepstops
)
•
Air time (see
3.2 Air time
)
In NITROX mode, both the percentage of oxygen in your tank and
the oxygen partial pressure limit must be entered into Suunto Vyper
Novo.
This ensures correct nitrogen and oxygen calculations and the
correct maximum operating depth (MOD), which is based on your
entered values.
The default oxygen percentage (O
2
%) setting is 21% (air) and
oxygen partial pressure (PO
2
) setting is 1.4 bar (20 psi).
To modify gas mix settings:
1.
While in Nitrox mode, keep [DOWN] pressed.
2.
Press [SELECT] to enter the Nitrox setting.
3.
Scroll to Mix1, Mix2 or Mix3 as desired and press [SELECT].
4.
Define the selected mix as Primary, Secondary or Off with [UP]
or [DOWN] and confirm with [SELECT].
53.6
Mix1
Primary
5. Adjust the blinking O
2
value with [DOWN] or [UP] to match the
oxygen % of your tank and accept with [SELECT].
40