Filter
Top Products
1. Installation of Suunto Wireless Transmitter onto your regulator.
2. Pairing the transmitter to your Suunto Vyper Novo.
3. Enabling the wireless integration in your Suunto Vyper Novo
settings.
The transmitter enters power saving mode with slower data
transmission rate if the tank pressure remains unchanged for more
than five (5) minutes.
The optional transmitter sends out a low battery (batt) warning
when its battery voltage is getting low. This is shown intermittently
instead of the pressure reading. When you get this warning, the
tank pressure transmitter's battery needs to be replaced.
3.26.2 Installing and pairing transmitter
When purchasing the Suunto Wireless Transmitter, we strongly
recommend that you have your Suunto representative attach the
transmitter to the first stage of your regulator.
The unit needs to be undergo a pressure test after installation and
typically this requires a trained technician.
In order to receive wireless data, the transmitter and the Suunto
Vyper Novo need to be paired.
The wireless transmitter activates when the tank pressure exceeds
15 bar (300 psi). The transmitter then starts sending pressure data
together with a code number.
When your Suunto Vyper Novo is within 0.3 m (1 ft) of the
transmitter, it receives and stores that code. The transmitter and
Suunto Vyper Novo are now paired. Suunto Vyper Novo will then
display the pressure data it receives with this code. This coding
63