Filter
Top Products
ITEM NO PART NO DESCRIPTION QTY
140 765-099 Outer Housing 1
(Includes #141)
141 765-059 Screw 1
142 765-016 Motor Field Assy 1
143 700-639 Screw 4
Motor Housing Replacement
WARNING: Before proceeding, follow the Pressure
Relief Procedure outlined on Page 5. Additionally,
follow all other warnings to reduce the risk of an
injection injury, injury from moving parts or electric
shock. Always unplug the sprayer before servicing!
1. Follow steps 1 through 6 in Armature Replacement.
2. Remove cover plate (#56) and Insulator Plate (#55),
located on Page 20 .
3. Disconnect black wire from Post (#2) of Motor Starter
(#54).
4. Disconnect black wire from Motor to white wire from
Power Cord.
5. Remove outer Motor Housing (#140).
6. Loosen set screw (#141) and push Motor Field
Assembly (#142) out from the back of the outer Motor
Housing (#140).
7. Inspect Motor Field Assembly (#142). If damaged,
replace.
8. To install Motor Housing, reverse steps 1 through 6
here and steps 1 through 7 of the Armature
Replacement.
19
Epic 447HPX
Figure 5