Filter
Top Products
15
English
the radio is in. For example, if you turn on your radio and it is connected to a GPS unit but
the GPS is not sending data, the radio displays Input GPS. At the 30 minute mark with no GPS
data input from the GPS unit, the radio display changes to Input Position.
Timeframe
Is GPS
Connected?
Display Alert Condition (Notes)
From power on to
30 minutes
Yes GPS OK None Normal
Yes Input GPS None Error *
No None None Normal
At 30-minute mark
after power on
#Note: If the
radio receives
GPS data by the
30-minute mark,
the next level of
displays apply
Yes GPS OK None Normal
Yes Input Position Yes Error * (continuous
display)
No Input Position Yes Normal (continuous
display)
The radio receives correct GPS data either through manual input or GPS.
Up to 4 hours after
receiving valid
GPS data
Yes Check GPS None Error
No None None Normal
At 4 hour mark
after receiving
valid GPS data
Yes Input Position Yes Error * (continuous
display)
None Input Position None Normal (continuous
display)
Over 23.5 hours
after receiving
valid GPS data
Yes Input Position None Error * (Lost GPS data;
continuous display)
None Input Position None Normal (Lost GPS data;
continuous display)
* If the radio displays an error condition, the radio cannot receive valid GPS data; check
the GPS
#NOTE: Be certain any manually-entered position is correct. If you enter the wrong position
and then make a DSC distress call, you will be telling the arrows to adjust each of the values
in turn.
--/-- 11:22U
---
o
--.- KT
35
o
40.610 N
139
o
46. 564 E
Use the up and down arrows
to adjust each of the values
in turn.
16
Back[CLR]
Forward[ENT]
Setup
Press and hold -
GPS Setup
Position Set