Filter
Top Products
29
English
If you connect the radio to a GPS receiver, the radio can automatically transmit your current
position during an automated distress call or during a normal DSC call.
Your radio supports a standard NMEA0183 input from a GPS receiver. Follow the steps
below to connect your radio to your GPS receiver:
1. Connect the BARE wire of the included accessory cable to the GROUND WIRE on your
GPS receiver.
2. Connect the YELLOW wire of the included accessory cable to the GPS DATA OUTPUT
WIRE on your GPS receiver. Below is a table of common GPS receivers and the proper
connections:
GPS MGF. Model Number(s)
GPS NMEA0183
OUTPUT Wire Color
(Connect to YELLOW
WIRE on your radio)
Ground Wire Color
(connect to BARE
WIRE on your radio)
Furuno
GP1650,
GP1850
White Black
Furuno GP30, GP36 White Blue
Garmin
Fixed Mount
Models
Blue Black
Garmin Portable Models Brown Black
JRC 100 Series Green Black
JRC 200 Series White Black
JRC GPS500 Yellow Green
Lowrance /
Eagle
Fixed Mount
Models
White Black
Lowrance /
Eagle
Portable Models Orange Black
Magellan
Fixed Mount
Models
Gray Black
Magellan Portable Models Orange Black
Yellow: NMEA_IN (+)
Red: External Speaker (+)
White: NMEA_OUT (+)
Orange: N/A
Blue: External Speaker (-, GND)
Black: GND
Brown: NMEA_OUT (-)
Bare: Shield/GND
Green: NMEA_IN (-)
13.8V DC