Filter
Top Products
19
English
Follow the steps below to edit the MMSI numbers in your directory:
1. Press
CALL-MENU
to display the call menu.
2. Select Directory. The screen displays any previously-entered MMSI numbers and names.
3. To add a new MMSI number to the directory, select New.
4. The radio prompts you to enter the nine-digit MMSI number. Use
CHANNEL UP
and
CHANNEL DOWN
to change the first digit; the
CHANNEL UP
button increases the number and
the
CHANNEL DOWN
button decreases it.
5. When the first digit is correct, press
ENT-1W/25W
. The cursor moves to the next digit. Enter
the remaining eight digits of the MMSI number in the same way. If you make a mistake
while entering a number, press
CLR-SCAN
to erase the wrong number and the cursor is
moved to the left digit.
6. When the ninth digit is correct, press
ENT-1W/25W
.
7. The radio prompts you to enter a name for this MMSI number; the name is what you
will see in the directory list. Each name can be up to 12 characters. Use
CHANNEL UP
and
CHANNEL DOWN
to change the first character. The channel buttons scroll through the
available characters according to the following table:
Channel Up Button Channel Down Button
Capital letters (A through Z) One blank space
Lower-case letters (a through z) Numbers (0 through 9)
Punctuation (/ ‘ + -) Punctuation (/ ‘ + -)
Numbers (0 through 9) Lower-case letters (a through z)
One blank space Capital letters (A through Z)
8. When the first character is correct, press
ENT-1W/25W
button. The cursor moves to the
next character. Enter the remaining 11 characters of the name. If the name is shorter
than 12 characters, press and hold
ENT-1W/25W
to complete the name entry. (If you press
and hold
ENT-1W/25W
without entering a name, the radio uses the MMSI number in the
directory list.) If you make a mistake while entering a number, press
CLR-SCAN
to erase
the wrong number and the cursor is moved to left digit.
9. When you finish entering the name, the radio displays the new MMSI number and name
and asks you to confirm. To save this directory entry, select Yes; to cancel this directory
entry, select No. The radio returns to the directory list.
10. To change an existing directory entry, select the entry you want to change.
11. To delete the directory entry, select Delete. To edit the code, select Edit, then use
CHANNEL UP
and
CHANNEL DOWN
to edit the MMSI number and the name.
12. When you are satisfied with the directory list, select Exit to close the menu screen.
Making DSC Calls
There are essentially four different types of DSC voice calls:
Call type What it does When to use it
Distress Alerts all stations that you need
assistance and sends them your
current position.
In an emergency only.