17
English
Feature Menu Item Function
Test Call Test Make sure your radio is working and configured
correctly.
Name and MMSI
Directory
Directory Store a list of 20 names and MMSI identification
codes for DSC calls.
Standby Mode Standby Automatically respond to all DSC calls within an
“Unavailable” status.
Received Call Log Receive Log Display the last 10 distress calls received by the
radio and the last 20 general calls.
What is an MMSI number?
In order to use DSC features, you must be assigned an MMSI number and program that
number into your radio. There are two kinds of MMSI numbers: individual numbers for
use by single boats and group numbers for use by fleets, boating organizations, event
coordinators, etc.
You can get more information on MMSI numbers at these resources:
x The dealer where you purchased the radio
x Recreational boaters can obtain an MMSI number from the Boat Owner’s Association
of the U.S. (http://www.boatus.com/mmsi/ or call 800-536-1536) or Sea Tow Services
International (http://seatow. com/boating_safety/mmsi.asp)
x Commercial boaters need a ship station license to get an MMSI number. For more
information, visit the Federal Communications Commission (FCC) website at http://
wireless.fcc.gov/marine/ fctsht14.html.
Entering MMSI numbers
Individual or User MMSI Number
#NOTE: Be sure you have the correct User MMSI number before entering it in the radio. The
radio only allows you to enter the user MMSI once. If you need to re-enter the User MMSI
number, contact customer service (see back page for contact information). Follow the steps
below to enter your individual or user MMSI number into the radio:
1. Display the normal menu and choose the Setup sub-menu.
2. Select User MMSI. (If an MMSI number was already entered, the screen displays it with
the message Cannot change over 1 time. Contact customer service. (See back page for
contact information.).
3. Use
CHANNEL UP
and
CHANNEL DOWN
to enter the first of the nine digits;
CHANNEL UP
increases the number and
CHANNEL DOWN
decreases it.
0________
Use the up and down arrows
to adjust each of the nine
digits in turn.
16
User MMSI
Back[CLR]
Forward[ENT]
User MMSI
Setup
Press and hold -
[New]