Xantrex Technology 1400i Marine Battery User Manual


 
975-0525-01-01 iii
Important Safety Instructions
IMPORTANT: READ AND SAVE THIS OWNERS GUIDE FOR FUTURE
REFERENCE.
This chapter contains important safety instructions for the PROwatt™ SW
International Sine Wave Inverter.
Before using the PROwatt™ SW International Sine Wave Inverter, READ
ALL instructions and cautionary markings on or provided with the
PROwatt™ SW International Sine Wave Inverter, the batteries, and all
appropriate sections of this guide.
1. Do not expose the PROwatt™ SW International Sine Wave Inverter to
rain, snow, spray, or bilge water. To reduce risk of fire hazard, do not
cover or obstruct the ventilation openings. Overheating may result.
2. To avoid a risk of fire and electric shock, make sure that wiring is in
good condition, adequately rated, and not undersized. Do not operate
the PROwatt™ SW International Sine Wave Inverter with damaged or
substandard wiring.
3. Do not operate the PROwatt™ SW International Sine Wave Inverter if
it has received a sharp blow, been dropped, or otherwise damaged in
any way. If the PROwatt™ SW International Sine Wave Inverter is
damaged, see the Warranty section.
4. Do not disassemble the PROwatt™ SW International Sine Wave
Inverter. It contains no user-serviceable parts. See Warranty for
instructions on obtaining service. Attempting to service the
PROwatt™ SW International Sine Wave Inverter yourself may result
in a risk of electrical shock or fire. Internal capacitors remain charged
after all power is disconnected.
5. To reduce the risk of electrical shock, disconnect DC power from the
PROwatt™ SW International Sine Wave Inverter before attempting
any maintenance or cleaning or working on any circuits connected to
the PROwatt™ SW International Sine Wave Inverter. Turning off the
unit from the control panel will not reduce this risk.
WARNING: Shock, fire, and heat hazard. Risk of
injury to persons.
PROWatt SW Inverter International.book Page iii Tuesday, June 30, 2009 9:58 AM