Xantrex Technology 806-1840-01 Marine Battery User Manual


 
975-0390-01-01 5
Features
Front Panel (Freedom HF 1800 T) Front Panel (
Freedom HF 1055 EMS,1800 EMS
)
Feature Description
1 Display panel displays inverter status and battery status information on the
screen. The panel can be detached to expose the dip switches behind it and to
extend and mount the panel on a wall or other location.
2 GFCI receptacles provide 1800 watts of power to operate AC devices. The
GFCI unit can be detached and reinstalled to a separate location. Replace the
GFCI unit with the GFCI blanking plate with knockout. The GFCI unit is also
removed to access the AC wiring compartment for hard wiring the inverter to
an existing AC power system.
3
(3a) Male PTI
a
Connector for plugging in a compatible AC Input cordset
cable with a female PTI plug. (3b) Female PTI Connector for plugging in a
compatible AC Output cordset cable with a male PTI plug.
a. Phillips & Temro Industries manufactures accessories for heating, cooling, silencing, emis-
sion and hybrid/electric vehicle technologies. The electrical cables with PTI connectors re-
ferred to in this manual are custom cables that are available for the trucking industry.
4 Mounting flange allows you to mount the inverter permanently.
RESET
TEST
TEST
RESET
FREEDOM HF 1800 T
2
1
3a 3b
4 4
Feature Description
1 Power module contains 12-volt DC terminals for ignition controls, an
auxiliary power source, and a remote port for attaching the display panel
using a communications cable.
2 GFCI unit receptacles provide 1000 watts (1055 EMS) and 1800 watts
(1800 EMS) of power to operate AC devices. The GFCI unit can be detached
and reinstalled to a separate location. Replace the GFCI unit with the GFCI
blanking plate with knockout. The GFCI unit is also removed to access the
AC wiring compartment for hard wiring the inverter to an existing AC power
system.
3 (3a) 18-inch (0.45m) AC Input electrical cord with 3-prong plug. (3b)
Knockout for routing AC output wiring.
4 Mounting flange allows you to mount the inverter permanently.
5 Display panel displays inverter status and battery status information on the
screen. Mount the panel on a wall or other location.
RESET
TEST
TEST
RESET
FREEDOM HF 1800 EMS
12V
Power
12V
Enable
Ignitio n
Control
Remote
FREEDOM HF 1800 EMS
FREEDOM HF
Input Voltage (V )
Select
STATUS
Battery
Fault
Utility
Input Current (A)
Output Power (kW)
2
1
3a 3b
4 4
5
Freedom HF InvChg Owners Guide.book Page 5 Tuesday, April 29, 2014 12:10 PM