Filter
Top Products
Control function operation
33
TY” indicator light blinks two or three times,
then comes on. This indicates the unlock
mode is selected.
EJU31152
Engine stop switch “”
The engine stop switch (red button) stops the
engine when the switch is pushed.
EJU31163
Engine shut-off switch “”
The engine shut-off switch automatically
stops the engine when the clip, on the end of
the engine shut-off cord (lanyard), is removed
from the switch, such as if the operator falls off
the watercraft.
Insert the clip under the engine shut-off switch
before starting the engine.
When the engine is not running, remove the
clip from the engine shut-off switch to prevent
accidental starting or unauthorized operation
by children or others.
EJU36286
Start switch “”
NOTICE
ECJ01310
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more
than 15 seconds without supplying water,
otherwise the engine could overheat.
The start switch (green button) starts the en-
gine when the switch is pushed.
Release the start switch as soon as the en-
gine starts to run. If the engine does not start
1 “L-Mode” (unlock) button
2 “SECURITY” indicator light
1 Engine stop switch
2
L-Mode
1
1
1 Engine shut-off switch
2 Clip
3 Engine shut-off cord (lanyard)
STOP
3
1
2
UF2M11E0.book Page 33 Monday, July 11, 2011 10:21 AM