Filter
Top Products
Maintenance
85
(3) Lift up the engine cover and remove it.
To install the engine cover:
(1) Place the engine cover in its original posi-
tion, and then push it down.
(2) Install the engine cover screws, and then
tighten them to the specified torque.
(3) Securely install the seat in its original po-
sition.
1 Engine cover
Tightening torque:
Engine cover screw:
4.5 Nm (0.46 kgf-m, 3.3 ft-lb)
1
UF2M11E0.book Page 85 Monday, July 11, 2011 10:21 AM