1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-187
2000, ADC Telecommunications, Inc.
DLP-737
Page 4 of 8
Cellworx Vision: Add Ring NE - Task Overview
X
2) Enter new network element identifiers
17) NE added -- updating topology
1) Select physical location for new node
3) Physically remove transmit fiber from left RIC
4) Physically remove receive fiber from left RIC
5) Connect new network element to left RICs
6) Wait for new network element to boot
9) Verifying NE connectivity over slot 16
10) Backing up NMIC database
11) Initiating 1st pass discovery
12) Physically remove transmit fiber from right RIC
13) Physically remove receive fiber from right RIC
14) Connect new network element to right RICs
15) Initiating 2nd pass discovery
16) Verifying physical connectivity
11713-D
7) Verifying NE shelf type
8) Select software images
Figure 737-2. Cellworx Vision Add Ring NE Task Overview
Cellworx Vision: Add Ring NE- Select Location
Please select the two network elements
between which the new network element
will be connected in the ring.
Current status: Waiting for all NEs to boot . . .
Cancel
X
Network element 1 / Network Element 3
Network element 3 / Network Element 2
Network element 2 / Network Element 1
Next>>
11714-A
Figure 737-3. Cellworx Vision Add Ring NE Select Location Window
