9032579-03 ELS100-24TX User Interface 25
Main Menu
The Main Menu is the first screen seen after successfully logging in to the
system. Figure 3-3 shows the Main Menu and the accompanying table
describes the Main Menu.
Figure 3-3. Main Menu
MAIN MENU Access Control: READ/WRITE
a. System Configuration Menu
b Switch Configuration Menu
c. Port Menu
d. Switch Statistics Screen
e. General Information Screen
f. Download Software Menu
g. Save Current Configuration
h. Return to Default Configuration
i. Logout
j. Reset
x. Previous Menu
Enter Selection:
Selection Description
System Configuration
Menu
Contains commands and parameters that reflect the global op-
eration of the switch.
Switch Configuration
Menu
Provides access to information and parameters affecting the
functional operation of the switch. You can configure Forward-
ing Table, Spanning Tree, and virtual LAN (VLAN).
Port Menu Shows the configuration of the individual ports on the switch
and allows you to modify switch port operation.
Switch Statistics
Screen
Presents switch-level and port-level statistics.
General Information
Screen
Displays the system software version, switch serial number,
base MAC address, system up time and power-up count.
Download Software
Menu
Contains parameters and commands for initiating a software
download to upgrade the switch operating software.
Save Current
Configuration
Saves current switch operating parameters to non-volatile
memory.
Return to Default
Configuration
Restores switch operating parameters to factory defaults. You
must reset the switch for activate default parameters.
Logout Logs out of the console interface. Once you logout, you must
enter a password before you can access the console interface
again.
Reset Performs a software reset of the switch by restarting the system
software and reloading all operating parameters.
