28 ELS100-24TX User Interface ELS100-24TX
Switch Configuration Menu
The Switch Configuration Menu allows you to modify switching-related
configuration parameters. Select
b
from the Main Menu to view the Switch
Configuration Menu. Figure 3-6 shows the Switch Configuration Menu
and the accompanying table describes the Switch Configuration Menu.
Figure 3-6. Switch Configuration Menu
SWITCH CONFIGURATION Access Control: READ/WRITE
a. Forwarding Table Configuration Menu
b. Spanning Tree Configuration Menu
c. VLAN Configuration Menu
d. Class of Service Configuration Menu
e. Forwarding Table Aging Time(seconds) 300
f. Broadcast Cutoff Rate 500000
g. Port Mirroring Enable No
h. Mirrored Port 2
i. Mirroring Port 1
j. Transmit Data Mirror Enable Yes
k. Receive Data Mirror Enable No
x. Previous Menu
Enter Selection:
Selection Description
Forwarding Table
Configuration Menu
Menu for configuring the switch forwarding table.
Spanning Tree
Configuration Menu
Menu for configuring the switch Spanning Tree
operation.
VLAN Configuration Menu Menu for configuring the VLAN operation of the switch.
Class of Service
Configuration Menu
Menu for configuring Class of Service for the switch.
Forwarding Table Aging Time Time in seconds until entries in the filter table are aged
out if not accessed (10-1,000,000 second range).
Broadcast Cutoff Rate Per second rate past which broadcast and destination
unknown unicast frames are not flooded on each
group of 8 ports on the switch (100-500,000 frames per
second range).
Port Mirroring Enable Allows you to enable (Yes) or disable (No) port
mirroring.
Mirrored Port The source port for the data to be mirrored.
Mirroring Port The destination port for the data to be mirrored.
Transmit Data Mirror Enable * Allows you to enable (Yes) or disable (No) the
mirroring of data transmitted out the mirrored port.
Receive Data Mirror Enable * Allows you to enable (Yes) or disable (No) the
mirroring of data received by the mirrored port.
*Only one of these options can be enabled at any given time. Changing the setting
of one of these options automatically changes the setting of the other option.
