xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
99
DGS–3426:5#show fdb
Command: show fdb
Unicast MAC Address Aging Time = 300
VID VLAN Name MAC Address Port Type
–––– ––––––––––––––– ––––––––––––––––– –––––– –––––––––––––
1 default 00–00–39–34–66–9A 1:10 Dynamic
1 default 00–00–51–43–70–00 1:10 Dynamic
1 default 00–00–5E–00–01–01 1:10 Dynamic
1 default 00–00–74–60–72–2D 1:10 Dynamic
1 default 00–00–81–05–00–80 1:10 Dynamic
1 default 00–00–81–05–02–00 1:10 Dynamic
1 default 00–00–81–48–70–01 1:10 Dynamic
1 default 00–00–E2–4F–57–03 1:10 Dynamic
1 default 00–00–E2–61–53–18 1:10 Dynamic
1 default 00–00–E2–6B–BC–F6 1:10 Dynamic
1 default 00–00–E2–7F–6B–53 1:10 Dynamic
1 default 00–00–E2–82–7D–90 1:10 Dynamic
1 default 00–00–F8–7C–1C–29 1:10 Dynamic
1 default 00–01–02–03–04–00 CPU Self
1 default 00–01–02–03–04–05 1:10 Dynamic
1 default 00–01–30–10–2C–C7 1:10 Dynamic
1 default 00–01–30–FA–5F–00 1:10 Dynamic
1 default 00–02–3F–63–DD–68 1:10 Dynamic
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
config multicast filtering_mode
Purpose Used to configure the multicast packet filtering mode for specific VLANs .
Syntax
config multicast filtering_mode [<vlan_name 32> | all] [forward_all_groups |
forward_unregistered_groups | filter_unregistered_groups]
Description This command is used to configure the multicast packet filtering mode for specified
VLANs on the Switch.
Parameters <vlan_name 32> – Specifies a VLAN by VLAN name to set. If no VLAN is defined here,
the rule is applied to all VLANs
[forward_all_groups | forward_unregistered_groups | filter_unregistered_groups] – The
user may set the filtering mode to any of these three options.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the multicast filtering mode to filter unregistered groups on all VLANs.
DGS–3426:5#config multicast filtering_mode all filter_unregistered_groups
Command: config multicast filtering_mode all filter_unregistered_groups
Success.
DGS–3426:5#
