xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
449
Example usage:
To delete a protocol VLAN group:
DGS-3426:5#delete dot1v_protocol_group group_id 1
Command: delete dot1v_protocol_group group_id 1
Success.
DGS-3426:5#
show dot1v_protocol_group
Purpose Used to display the configurations for a protocol VLAN group.
Syntax
show dot1v_protocol_group {group_id <id>}
Description This command is used to display the configurations of a protocol VLAN group.
Parameters
group_id <id> − Enter an integer from 1 to 16 to identify the protocol VLAN group to be
displayed.
Entering this command without the group_id parameter will display the configurations for
all configured protocol VLAN groups.
Restrictions None.
Example usage:
To display the configurations for a protocol VLAN group:
DGS-3426:5#show dot1v_protocol_group group_id 1
Command: show dot1v_protocol_group group_id 1
Protocol Group ID Frame Type Protocol Value
------------------ ----------- ------------------
1 EthernetII 86DD
Total Entries: 1
DGS-3426:5#
