A SERVICE OF

logo

GL815E Endura Motherboard Product Manual
Page 26 of 51
3.7 Mechanical
3.7.1 Motherboard
The GL8"5E motherboard meets the ATX Motherboard Interface Specification, version 2.03. It
measures "2.0 x 7.5 inches and is manufactured using a 4-layer PCB with components on the
topside only. The screen-printing includes the following.
Product Name, RadiSys part number and RadiSys branding.
Location for serial number label
Selected component reference designators
The figure below shows the dimensions of the motherboard and the location of the rear panel
connectors (referenced via pin ") and the location of the processor, memory sockets and expansion
slots.
0.000
(0.250)
0.275
0.835
1.147
1.854
2.655
3.434
3.658
3.980
4.567
5.890
6.099
6.200
6.788
7.390
7.588
8.000
8.388
9.188
9.988
10.600
11.100
11.400
11.750
0.000
1.300
5.310
7.800
8.000
8.800
8.320
6.200
5.790
5.980
5.200
(0.900)
(1.300)
(0.300)
0.325
0.000
0.060
1.020
1.332
2.000
4.965
5.200
5.425
5.880
(0.433)
(0.825)
(0.915)
(0.990)
(1.010)
(1.229)
(0.643)
(0.080)
5.382
6.200