GL815E Endura Motherboard Product Manual
Page 7 of 51
1 Overview
The GL8"5E is an ATX form factor motherboard based around an Intel Celeron or Pentium III
processor and an Intel 8"5E family chipset. It integrates video, audio, system monitoring and
Ethernet on a "2.0 x 7.5-inch board and is targeted at the embedded PC technology market.
Form Factor
ATX 2.03 compliant, "2.0 x 7.5 inches
Processor
370 pin PGA socket for Intel Celeron and Pentium III processors
66, "00 or "33 MHz bus speed
Chipset
Intel 8"5E with National Semiconductor PCI/ISA Bridge
Memory
Two DIMM sockets for PC"00 & PC"33 SDRAM modules without ECC
or parity
Min. "6MB, max. 5"2MB memory
Video
3D graphics controller integrated within chipset
On-board PanelLink flat panel controller option
Support for DDWG DVI & VESA DFP
Audio
AC97 v2." CODEC
Digital audio controller integrated within chipset
Line-in, Line-out and MIC jacks on rear panel
ATAPI CD input and telephony connectors on motherboard
Optional on-board mini-speaker
Power Management
APM, ACPI, PCI PME
System Management
Voltage, temperature and fan monitoring for 2 fans
Fan speed control for 2 fans
BIOS
Based on PhoenixBIOS™ 4.0 release 6.0
4Mbit device
Includes POST, Setup, ACPI, APM, PnP, video BIOS
Customizable startup logo
I/O
Dual rear USB "."
Third USB channel on header, fourth channel on AGP connector
Two serial ports (one on header) with IrDA in lieu of second port
Bi-directional/EPP/ECP parallel port
PS/2 keyboard and mouse (duplicated on internal headers)
General Purpose I/O Lines (8)
Network
Integrated within chipset plus Intel 82562ET "0/"00Mbps Ethernet
transceiver
Disks
Dual UltraDMA/"00 interfaces with ATAPI CD, LS"20 and ZIP drive
support
3-mode floppy interface with on-board connector
Expansion
" AGP 4X slot
5 PCI 2.2 slots (one shared with an ISA slot)
2 ISA slots (one shared with an PCI slot)
