8
1995-1997 - INLINE, INC PATHFINDER OPERATION MANUAL - REV2.1A May 19, 1997
Group Mapping:
The GROUP Mapping section gives you visual feedback of which boards are in which group (see Board
Configuration on page 13 for more details). Enter this section by pressing the ENTER/SELECT button
when the screen reads as follows:
The following screen will appear (although it may appear different for your unit):
The bottom row of numbers lists the boards available on the unit, where boards 1 - 6 are as follows:
Board # Description
1 Red Video Board
2 Green Video Board
3 Blue Video Board
4 Sync Board
5Audio Left Board
6 Audio Right Board
The screen above shows an example of a PATHFINDER set with two groups. Group 1 contains boards 1,
2, 3 and 4 (Red, Green, Blue and Sync), while Group 2 contains boards 5 and 6 (Audio Left and Right). By
assigning the video and audio boards in two different groups, you can switch them independent of each
other. You can "break away" the audio from the video.
Press the MENU button to exit this section.
The number on top of the board
designates the group that board is
in.
Group Row
This row lists the boards available
Board Row
