19
1995-1997 - INLINE, INC PATHFINDER OPERATION MANUAL - REV2.1A May 19, 1997
FP1 * Enable the front panel operation (take the unit out of the Stand-by mode and
Executive mode).
[OK]
FP2 * Executive mode. Disable access to configuration menus from the front panel
(Path Config, RGB delay, RS-232 baud rate, and Command code).
[OK]
INF0 Get the firmware version [PATHFINDER V2.0a]
INF1 Get the Configuration Number (C/N). Varies with model #
1
Leading and ending codes not shown for clarity.
* Global Settings (Save with SAVE0 Command)
SPECIFICATIONS
RGBS Input:
Connectors (4) Female BNC
Impedance 75 Ohms
RGB Level 0.7 Vp-p Nominal, 2 Vp-p maximum
Sync Level 5 V maximum
Coupling
DC coupled. Any input signal DC offset should be limited to
±
0.5 VDC to allow for
an acceptable signal swing without distortion.
Audio Input
Connectors (2) Female RCA
Impedance 620 Ohms
Level Line Level
RGBS Output:
Connectors (4) Female BNC
Impedance 75 Ohms
Bandwidth 120 MHz
RGB Gain
1.0
±
5%
Sync Output:
1.0
±
5% Gain into 75 Ohms, 4 V maximum
Audio Output:
Audio Connectors (2) Female RCA
Audio Impedance 620 Ohms
Gain:
1.0
±
5%
Bandwidth: 50 MHz
General:
Power: 96 - 260 VAC, 40 to 60 Hz
Power Consumption: 35W Max.
Size: 17"W x 11.5"D x 5.25"H
Weight: 20 lbs.
