Quick Start 9
E-EQ-MX3XOGWW-N MX3X User’s Guide
Quick Start
Important
If the mobile device has AppLock installed, please refer to MX3X Reference Guide,
AppLock for setup and processing information before continuing.
Note: When your mobile device is pre-configured, the radio, PCMCIA card and endcaps are
assembled by LXE to your specifications.
This section’s instructions are based on the assumption that your new system is pre-configured
and requires only accessory installation (e.g. handstrap, stylus) and a power source. LXE
recommends that installation or removal of accessories be performed on a clean, well-lit surface.
When necessary, protect the work surface, the mobile device, and components from electrostatic
discharge.
This guide takes you through an introduction to and operation of the MX3X.
In general, the sequence of events is:
1. Insert a fully charged battery and press the Power button.
2. Connect an external power source to the unit (if required).
3. If the screen does not automatically display, press the Power button.
4. Adjust screen display, audio volume and other parameters if desired.
Note: Do not connect a tethered scanner cable to a USB-C or USB-H labeled endcap port.
These ports cannot power a tethered scanner.
Troubleshooting
Can’t align the screen,
change the date/time or
adjust the volume.
AppLock is installed and running on the mobile device.
AppLock restricts access to the control panels. Contact your
System Administrator.
Touchscreen is not
accepting stylus taps or need
recalibration.
Press <Ctrl>+<Esc> to force the Start Menu to appear. Use
the tab, backtab and cursor keys to move the cursor from
element to element.
MX3X seems to lockup as
soon as it is warm booted.
There may be slight delays while the wireless client connects
to the network, authorization for voice-enabled applications
complete, Wavelink Avalanche management of the MX3X
startup completes, and Bluetooth relationships establish or re-
establish. When the desktop appears or an application begins,
the MX3X is ready for use.
