Insert Main Battery 11
E-EQ-MX3XOGWW-N MX3X User’s Guide
Insert Main Battery
Press the Power button after the battery is inserted into the battery compartment.
Note: New batteries must be charged prior to first use. This process takes up to four hours in
an LXE Multi-Charger Plus and eight hours with an external power source connected to
the power jack on the endcap of the mobile device.
Figure 7 Battery Contacts in Battery Compartment
The Main Battery compartment is located at the bottom of the back of the computer. The arrows in
the figure titled Battery Contacts point to the battery contacts in the computer. The figure titled
Main Battery shows the cradle and charger contacts on the back of the main battery.
Figure 8 Main Battery
Place the battery in the compartment, making sure the side of the battery with six contacts matches
up with the battery contacts in the computer battery compartment. Do not slide the battery
sideways into the compartment.
Firmly press the battery into the compartment until the Retaining Clip on the battery clicks. The
battery is now securely fastened to the computer. The computer draws power from the battery
immediately upon successful connection.
Note: Do not cover the vent aperture in the battery well (vent aperture is located in the top left
area of the battery well) with anything other than the main battery.
Check Battery Status
Tap the Start | Settings | Control Panel | Power icon. Main and backup battery level, status and
Power Scheme timeout setting options are displayed.
