16 Power Button
MX3X User’s Guide E-EQ-MX3XOGWW-N
Power Button
Note: Refer to the section titled Power Modes in the MX3X Reference Guide for information
relating to the power states of the mobile device.
Figure 15 Power Button
The power button is located above the ESC key on the keypad. When a battery is inserted in the
mobile device press the Power button.
Quickly tapping the Power button places the device immediately in Suspend mode. Quickly
tapping the Power button again, or touching the screen, immediately returns the device from
Suspend.
When the Windows desktop is displayed or an application begins, the power up (or reboot)
sequence is complete. Please refer to the section titled Power Modes in the MX3X Reference Guide
for a list of the kinds of activities (Primary Events) that will return the device from Suspend Mode.
Restart Sequence
Tap Start | Run, type warmboot in the text box, then press the Enter button. If the touchscreen is
not accepting taps or needs recalibration, press <Ctrl>+<Esc> to force the Start Menu to appear.
When the Windows desktop is displayed or an application begins, the power on (or reboot)
sequence is complete. If any changes to the settings had been saved previously, they are restored
on reboot.
