44 Battery Chargers
MX3X User’s Guide E-EQ-MX3XOGWW-N
Battery Chargers
Note: LXE recommends that the correct MX3 Multicharger Plus always be used to charge the
MX3X main battery. The Multicharger plus label is located on the back of the device and
the charger must have been upgraded to V1.01 or greater. Please contact your LXE
representative for further information about the V1.01 upgrade kit, if needed.
LXE Multi-Charger Plus
Figure 29 MX3 Multi-Charger Plus
The main battery can be charged in the MX3 Multi-Charger Plus. The main battery charges the
backup battery using the mobile device's internal charging circuitry. The battery charger requires
an AC power source before charging can begin.
External Power Supply (Optional)
The DC power jack is located on the endcap.
The cradle power jack is located on the back of the cradle. The mobile device (and the Desktop
Cradle) connect to any of the following power supplies through their DC Power Jack.
Figure 30 US AC/DC 12V Power Supply and Cigarette Lighter Adapter
Figure 31 International AC/DC 12V Power Supply
Note: When the MX3X is receiving power through a cradle connected to external power, the
cradle's Status LED and the device's CHGR LED are illuminated.
The LXE-approved AC Power Adapter is only intended for use in a 25ºC (77ºF) maximum
ambient temperature environment.
