Bluetooth Devices 27
E-EQ-MX3XOGWW-N MX3X User’s Guide
Bluetooth Devices
Assumption: The System Administrator has Discovered and Paired targeted Bluetooth devices
for each MX3X. The System Administrator has also enabled / disabled Bluetooth
settings and assigned a Computer Friendly Name for each MX3X. See the MX3X
Reference Guide for information and instruction on the MX3X, Bluetooth control
panel applet and supported LXE Bluetooth printers and scanners.
The Bluetooth taskbar Icon state and Bluetooth scanner LED states change as Bluetooth devices
are discovered, pair, connect and disconnect. There may be audible or visual signals as paired
devices re-connect with the MX3X. LXE Bluetooth printers and scanners are displayed on the
Bluetooth Devices screen. All other Bluetooth devices are ignored (see the MX3X Reference Guide
for details).
Taskbar Icon Legend
Bluetooth module is connected to one or more of the targeted Bluetooth
device(s).
MX3X is not connected to any Bluetooth device.
MX3X is ready to connect with any Bluetooth device.
MX3X is out of range of all paired Bluetooth device(s). Connection is inactive.
Note: When an active paired device, not the MX3X, enters Suspend Mode, is turned Off or
leaves the MX3X Bluetooth scan range, the Bluetooth connection between the linked
device and the MX3X is lost. There may be audible or visual signals as paired devices
disconnect from the MX3X. The Bluetooth remote device should be as close as possible,
in direct line of sight, with the MX3X during the pairing process.
Notes
• The MX3X does not have a Bluetooth managed LED.
• The LED on the Bluetooth scanner illuminates during a scanning operation; the Scan LED
on the MX3X does not illuminate.
• Barcode data captured by the Bluetooth scanner is manipulated by the settings in the
MX3X Scanner Properties control panel applet.
• Multiple beeps may be heard during a barcode scan using the Bluetooth scanner; beeps
from the Bluetooth scanner as the barcode data is accepted/rejected, and other beeps from
the MX3X during final barcode data manipulation.
See Accessories for supported Bluetooth printers and scanners.
AppLock, if installed, does not stop the end-user from using the Bluetooth application, nor does it
stop authorized Bluetooth-enabled devices from pairing with the MX3X while AppLock is in
control. See the MX3X Reference Guide for more Bluetooth information.
Mobile Bluetooth Accessories
Using the Bluetooth Barcode reader, scan the (Lnk) pairing barcode located on the MX3X to pair
the mobile barcode reader with the MX3X Refer to the MX3X Reference Guide, Chapter 1 –
Introduction, Bluetooth section for instruction when Discovering nearby Bluetooth scanners and
printers.
