76
● DATA Port
RS-485 Port
System controller’s rear panel
● System Controller
Power Source: 9 V DC, 300 mA (using the supplied AC adapter)
Power Source (Supplied AC Adapter): 120 V AC, 60 Hz, 200 mA
Data Output/Input Port: 6-conductor modular jack (RS-485, Full duplex) x2
Serial port: 9-pin D-sub connector
Controller Number: 1 to 8 (rotary switch)
Ambient Operating Temperature: –10 °C to + 50 °C {14 °F to 122 °F}
Unit Number Selection: 1 to 99
Monitor Number Selection: 1 to 99
Camera Number Selection: 1 to 256
Dimensions
Main Unit: 290 mm (W) x 111 mm (H) x 221 mm (D)
{11-7/16 in. (W) x 4-3/8 in. (H) X 8-11/16 in. (D)}
3D joystick Unit: 134 mm (W) x 146 mm (H) x 218 mm (D)
{5-1/4 in. (W) x 5-3/4 in. (H) x 8-9/16 in. (D)}
Weight
Main Unit: 1.3 k
g {2.9 lbs.} (without the AC adapter)
3D joystick Unit: 0.8 k
g {1.8 lbs.}
SPECIFICATIONS
STANDARD ACCESSORIES
Operating Instructions (This Document) ................................ 1 pc.
The following parts are used during installation procedures.
AC Adapter (UL Listed, Model No: N0JBEF000001) ............. 1 pc.
6-conductor Modular Cable (3 m) .......................................... 1 pc.
TBTARBRA
IN OUT
GND GND
TA
TB
RA
RB
Internal block
