A SERVICE OF

logo

Open as PDF
next previous
7-1
P/N: 4PFX020-020
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
24APR06 v1.1 MusGT(4PFX..020 v1.1)
Fig. 7-a
A. Attach the 3" x 3" sleeve onto the super-
charger discharge using the supplied #44
hose clamp. (See Fig. 7-a.)
B. Install the 3/4"NPT x 1" plastic 90° into the
cast discharge tube as seen. (See Fig. 7-b.)
C. Using the supplied 5/16-18 x 3/4" socket
head screws and gasket, attach the 3.5" cast
flange onto the carburetor enclosure lid.
(See Fig. 7-c.)
Section 7
SUPERCHARGER DISCHARGE
7.1 SUPERCHARGER DISCHARGE
Fig. 7-b
D. Using the supplied #52 hose clamp, secure
the 3.5" x 3" reducer sleeve to the 3.5" cast
flange. (See Fig. 7-d.)
Fig. 7-c
Fig. 7-d