A SERVICE OF

logo

7-2
P/N: 4PFX020-020
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
24APR06 v1.1 MusGT(4PFX..020 v1.1)
Install the discharge tube between the super-
charger discharge and carburetor enclosure
inlet and secure with the remaining #44 hose
clamps. Attach the by-pass valve to the 1" x
90° fitting on the discharge tube and secure
with a #16 hose clamp. (See Fig. 7-e.)
*** NOTE ***
Check that all clamps are tight.
Fig. 7-e