Loading and Unloading Your Combination Rifle/Shotgun (cont’d)
3(cont’d) .again and check to see if the shot shell or cartridge are fully seated in the chambers.
(Warning never force the barrel into the closed position). If the shell and cartridge are fully
seated then reclose the action. If the shot shell and cartridge are not fully seated check the
chamber for blockage and check the shell or cartridge for deformation and retry closing the
action once more. (See
Picture 33). If the shell and cartridge are the correct type and the
chambers are not blocked and the shell and cartridge are not deformed and the locking lever
does not move to its fully locked position unload the gun (follow Unloading Instructions) and
have a competent gunsmith look at the gun or return the gun to Remington ISP for inspection.
Do not force the gun closed.
TO UNLOAD:
1. Break open the firearm by depressing the locking lever
and tipping the barrels down. (See
Picture 34).
2. Remove the shell and/or cartridge by grabbing the
ammunition by the rim and pulling from the chamber.
(See
Picture 35).
3.
Visually check to make sure that the barrels are free from
obstruction. (See
Picture 36).
13
Picture 33
Pictur
e 36
Picture 35
Picture 34
