9
External Control Parts (cont’d)
Extractors: SPR 94 rifles are equipped with extractors for extracting the fired rounds when the action is opened.
The extractor is located in the back center of the barrels. This is a single post extractor and will extract both rounds
fired or unfired when the action is opened. (See
Pictures 15 and 16).
Forend: The forend is the wooden grip piece that attaches to the barrel assembly and locks the barrel assembly into
the receiver. (See
Picture 17). The forend has a mechanical latch which is used to lock and unlock the forend to
the barrel assembly. (See
Picture 18). Never attempt to fire your combination rifle/shotgun without having the
forend locked in its proper position on the barrel assembly.
Barrel Selector: The barrel selector is located on the receiver tang. (See Picture 19). It is used to select which
barrel will be fired when the trigger is pulled (Rifle or Shotgun). Push the button in the center and move it fore or
aft to select which barrel/ammunition you wish to fire. Push the selector fully forward to select the rifle barrel for
firing. (See
Picture 20). Pull the selector fully rearward to select the shotgun barrel for firing. (See Picture 21).
MAKE SURE YOU UNDERSTAND HOW THE SELECTOR WORKS BEFORE YOU LOAD OR USE THE
COMBINATION RIFLE/SHOTGUN.
Picture 15 Picture 16
Picture 17 Picture 18
Picture 19 Picture 20
Picture 21
