Remington's SPR 94 Manual

A SERVICE OF

next previous

Instructions For Disassembly Of The Combination Rifle/Shotgun

1. Make sure the combination rifle/shotgun is unloaded (FOLLOW UNLOADING INSTRUCTIONS)

and pointed in a safe direction.

2. Make sure the trigger block safety is engaged in the “ON” or “SAFE” position. (See

Picture 39).

3. Remove the forend from the barrel by pulling out the lever in the lower center of the forend and

removing the forend in a downward outward swinging motion. Never force the forend off the barrel

and receiver.

4. With the barrels and receiver supported with one hand depress the cocking lever/locking lever fully

and tip the barrels down until they disengage from the receiver. Check the barrels for damage and

blockage after removal.

15

Picture 39