3M 370 Marine Instruments User Manual


 
Check the 3M
TM
SpotOn
TM
Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A
14 Display Panel
English 202052A
Ready
e ready screen displays the serial number of the
SpotOn sensor and indicates the SpotOn sensor
cable and sensor are properly attached to the SpotOn
control unit. e SpotOn sensor is now ready to be
attached to the patient.
Equilibration
A ashing yellow temperature display indicates the
sensor has been connected to the patient and to the
control unit and is in the process of equilibration.
e graph below the temperature output indicates
the progress of equilibration. is process will take
approximately three minutes.
If you see a temperature in the upper le hand corner
of the screen, that is the last recorded temperature that
has been captured by the sensor on the patient’s head.
e sensor captures and records a temperature every
ve minutes.
Aer the equilibration is complete, the patient’s body
temperature is displayed on the SpotOn control unit
in bold white numbers and can be automatically
transmitted to the patient monitor via the monitor
cable.
Running
e running screen displays the deep tissue
temperature of the patient in white. e trend graph
at the bottom of the screen displays the last two hours
of the patient’s temperature in ve minute increments.
e bars on the graph will begin lling from the right
with the 36°C always visible. e blue bars indicate
that the temperature dropped below 36°C (white
indicates the temperature is above 36°C).
Control unit error
e SpotOn control unit error screen displays when
there is a system error. Discontinue use of unit.
Contact a biomedical technician.
Sensor error
e sensor error screen displays when there is a
temperature sensor or cable error. See “Section 4:
Troubleshooting” on page 15 for details.
SN - 000000000
39
37
35
36 9
36 0
C
C
E-xx
E-xx