3M eg4 Marine Instruments User Manual


 
Turning on
LED indicator
053-644, Rev H Page 8 eg4
8
Turning on
1. To turn on the Edge, press the on/off and enter button.
The Edge splash screen (see Figure 2-3 for an example, page 10) will appear
indicating the model (i.e. “eg4”) and firmware version. The screen will be in the
measurement view.
Figure 2-2: Powered on with measurement view displayed
LED indicator
There is a three-color LED indicator on the Edge, located to the right of the 3M logo which
includes Red, Amber, and Green.
View
Displays measurement values, battery
information, and calibration information
LED Indicator
Battery indicator icon
If icon is fully shaded, this indicates full
battery power (approx.50+ hours)