Filter
Top Products
Stopping a study
Indicators/Icons on the display
053-644, Rev H Page 38 eg4
38
Stopping a study
While the dosimeter is running, you can end the study by pressing and holding the stop button.
How to stop a noise study
1. While running, press and hold the run/stop button.
a. A 3, 2, 1 countdown will appear.
b. The stop indicator will be shown in the display.
Indicators/Icons on the display
The Edge is equipped to notify you of operational/status updates. These indicators (or alert
notices) are located on the top right-hand side of the screen. Table 4-1 explains the function of
each indicator.
Indicator Icon
Explanation
Stop – indicates the dosimeter is currently in
the stop status (opposed to run).
Run - indicates the dosimeter is currently
logging a study.
Battery charge status – When completely
shaded in black, this indicates full battery
power. If half shaded, this represents ½ battery
power
OL
Overload –will appear whenever the input
signal exceeds the range of the dosimeter.
Table 4-1: Indicators (i.e., run, stop, battery, and OL)