Filter
Top Products
Page 10 YP3040 Installation Guide
Technical specifications
Troubleshooting
Unit Function Description
YP3040
Input voltage 24 V AC 50/60 Hz
Power consumption 30 VA
Movement range Pan 0° to 355°
Tilt 10° to -80°
Movement speed Pan 7.5°/s
Tilt 6°/s
Protocol (default) Pelco-D
Bit rate (default) 2400 bps
Address (default) 1
Operating temperature -20°C to 65°C (-4°F to 149°F)
Load Torque (brace axis, see page 6) 1.5 N m (1.1 ft. lb)
Load type Top load
Maximum load 8kg (17.6lb)
Weight 4.2 kg (9.3 lb)
Protection class IP66 (indoor and outdoor use)
Construction Aluminum alloy
Problem Probable cause Remedy
YP3040 does not move No power applied Check that power supply is connected
Faulty connection in power supply Check that power supply cable is
intact and connected correctly
YP3040 moves when power is
applied, but is otherwise
unresponsive to commands
Faulty RS-485 cable connection to
network camera
Check that RS-485 cable is intact and
connected correctly
PTZ functionality not enabled in net-
work camera
Check that PTZ functionality is
enabled in Setup tools, see Setup, on
page 9