Filter
Top Products
YP3040 Installation Guide Page 9
ENGLISH
Setup
When you install a compatible Axis network camera on the YP3040 Pan-Tilt Motor, the controls will
be available from the Live View page in the camera’s web pages after enabling the PTZ functionality
in Setup tools. Follow these instructions to enable PTZ functionality in the camera:
1. Go to Setup > System Options > Ports & Devices > COM Port in the camera’s web pages, and
set Usage to Pan Tilt.
2. Refer to the User’s Manual supplied with your product for instructions on how to configure the
PTZ settings.
Power supply cable
PTZ control cable
(RS-485 to camera)
(24 V AC from mains adaptor)
Network cable
(Ethernet RJ-45 to camera)
Mains
adaptor
Network camera