Filter
Top Products
23
Appendix C ~ Serial Commands
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
AA
This command activates and deactivates the auto answer feature.
Command form:
AA
<X>
Explanation
Value
0 = Disables auto-answer
1 = Enables auto-answer
2 = Toggles between states (regardless of current state)
Null = Reports back the current state
Return values
The command will return the updated condition (On=1, Off=0) of the auto answer
in the same format as the command.
AD
This command changes the state of the auto disconnect function.
Command form:
AD
<X>
Explanation
Value 0 = Sets Auto Disconnect to Off
1 = Sets Auto Disconnect to Loop
2 = Sets Auto Disconnect to Call Progress (CP)
3 = Sets Auto Disconnect to Loop+CP
Null = Reports back the current state
Return values
The command will return the updated connection state of the unit in the same format
as the command. If the sent command changes the state of the unit, the updated
state is returned.
If: Command Returns:
current disconnect state is Off AD 0
current disconnect state is Loop AD 1
current disconnect state is CP AD 2
current disconnect state is Loop+CP AD 3
AGC
This command changes or reports back the state of the AGC for a microphone or line
input. Command form:
AGC
<CH> <X>
Explanation
Channel 1 = Mic/Line Input,
2 = Aux Input, 3 = 4 Wire Input
4 = Telco Input
Value
0 = Sets the state to Off
1 = Sets the state to On
2 = Toggles between states (regardless of current state)
Null = Returns the current state
Return values
The command will return the updated condition (On=1, Off=0) of the AGC in the
same format as the command.