Filter
Top Products
Appendix C ~ Serial Commands
28
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
LV L
This command reports back the level for a given channel.
Command form:
LVL
<CH> <X>
Explanation
Channel 1 = Mic/Line Input, Line Output
2 = Aux Input, Aux Output
3 = 4 Wire Input, 4 Wire Output
4 = Telco Input, Telco Output
Value I = Specifies an input meter
O = Specifies an output meter
Return values
The command will return the input level of the channel in the same format as the
command.
MHP
This command changes or reports back the state of the high pass filter for the
Mic/Line input. Command form:
MHP
<X>
Explanation
Value 0 = Sets the state to Off
1 = Set the state to On
Null = Returns the current state
Return values
The command will return the updated condition (On=1, Off=0) of the high pass
filter in the same format as the command.
MLINE
This command changes or reports back how much gain is applied to the Mic/Line
input. The three settings are 0dB, 25dB, and 55dB.
Command form:
MLINE
<X>
Explanation
Value 1 = Sets the state to 55dB gain
2 = Sets the state to 25dB gain
3 = Sets the state to 0dB (line level)
Null = Returns the current state
Return values
The command will return the updated condition of the gain applied in the same
format as the command.