Filter
Top Products
31
Appendix C ~ Serial Commands
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
TAMODE
This command controls or reports the Telephone Adapt Mode control of the unit.
Command form: TAMODE <X>
Explanation
Value 0 = Sets Telephone Adapt Mode to Auto
1 = Sets Telephone Adapt Mode to Burst
Null = Reports back the current state
Return value
The command returns the updated connection state of the unit in the same format as
the command.
TE
This command controls or reports the connection status of the unit.
Command form:
TE
<X>
Explanation
Values 0 = Sets the unit to disconnect from the line
1 = Sets the unit to connect to the line
2 = Toggles the states
Null = Reports back the current state
Return value
If the current state is On, the following is returned: TE 1. If the current state is Off,
the following is returned out the serial port: TE 0
TERL
This command reports back the telephone echo return loss (TERL) for the GT1524
in decibels. Command form:
TERL
Example
If the current TERL level is 10dB, the following is returned out the serial port:
TERL 10
TERLE
This command reports back the telephone echo return loss enhancement (TERLE)
for the GT1524 in decibels. Command form:
TERLE
Example
If the current TERLE level for the telephone canceller is 20dB, the following is
returned out the serial port: TERLE 20