Filter
Top Products
ENGLISH
74
KEY SIMBOLS LIT BESIDES
THE NUMBERS
FUNCTION
DESCRIPTION
P1+ = data dump
- P1 -
When ENTER is pressed with P1
on the display, the data stored in
the memory of the instrument are
unloaded (DUMP); press the
PROG key to move on to step P2.
During data dumping the messa-
ge P1 appears on the upper
display of the instrument. At the
end the instrument automatically
returns to normal operating mode.
The unloading of data from the
instrument memory may be
momentarily stopped by pressing
the ENTER key. Press the
ENTER key again to reactivate
data unloading.
When the PROG key is pressed,
data unloading is finally conclu-
ded.
At the end of each block the
report is sent with the maximum
(peak), minimum and mean
values calculated on the block.
During the DUMP phase the
instrument does not switch off
automatically, all the key functions
are disabled except the ENTER,
PROG and ON/OFF keys.
Note:
The block is defined at the
moment of storage as a group of
consecutive recordings. The first
interruption of storage ends and
determines the block.