Filter
Top Products
C) Setting communication
- select FILE from the Hyper Terminal window (one click)
- select PROPERTIES from the pull-down menu (one click) and the “Properties” window will
appear
- on the “telephone number” card, for the Connect property, choose “directly to COM1” or
“COM2”, depending on the serial gate that you intend to use for communication with the mea-
suring instrument
- on the “telephone number” card, select CONFIGURE (one click) and the “Gate settings” card
will appear
- on the “Gate settings” card select:
BITS PER SECOND: 19200
DATA BITS: 8
PARITY: None
STOP BITS: 1
FLOW CONTROL: Xon/Xoff
OK to confirm the gate setting (one click)
ENGLISH
104