Filter
Top Products
D) To alter the communication settings of the terminal, in order to make them compatible with those
of the measuring instrument used (unless a terminal setting file has already been saved):
select SETTINGS in the terminal window (one click)
select COMMUNICATIONS from the menu (one click)
the COMMUNICATIONS window for setting the communication procedures will appear on
the screen; set:
TRANSMISSION SPEED: 19200 which must correspond to the speed set on the instru-
ment (one click)
DATA BITS: 8 (one click)
STOP BITS: 1 (one click)
PARITY: None (one click)
FLOW CONTROL: Xon/Xoff (one click)
CONNECTOR: COM1 or COM2 depending on the gate used for connection (one click)
CHECK PARITY and SHOW CARRIER must remain unmarked
OK to confirm the setting (one click)
ENGLISH
98