Filter
Top Products
148
Map orientation is shown in north up (left) and track up (right).
This is fine if you're always traveling due north. What you see to your
left corresponds to the left side of the map, to your right is shown on the
right side of the map, and so on. If, however, you travel any other
direction, the map doesn't line up with your view of the world.
To correct this problem, a track-up mode rotates the map as you turn.
What you see on the left side of the screen should always be to your left,
and so on. Another option is course-up mode, which keeps the map at
the same orientation as the initial bearing to the waypoint. When
either the track-up or course-up mode is on, an "N" shows on the map
screen to help you see which direction is north.
To change map orientation: from the Map Page, press
MENU|↓ to MAP
ORIENTATION|ENT. Use ↑ or ↓ to select the desired mode, then press ENT.
Press
EXIT|EXIT to return to the page display.
Map Menu (left) Map Orientation menu with the North Up map
orientation option selected (right).
Navionics
Charts
Your Unit can display Navionics
electronic charts on MMCs. They
work just like a MapCreate custom map on a MMC.
In Track Up mode, map shows "N" and arrow to indicate north.