Eagle Electronics 320, 320DF Fish Finder User Manual


 
129
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 1; the arrival alarm has been triggered and
the bearing arrow on the compass rose has turned to point toward Wpt
2, off to the east. In Fig. 3 the traveler has turned east on his new
course and is heading straight for Wpt 2, which is 2.87 miles away. Fig.
4 shows route navigation on the Map Page. In this figure, the traveler
has reached Wpt 2 and is half-way along the leg between Wpts 2 and 3.
Trails
Delete a Trail
This is the command used to erase or delete a trail:
Press
MENU|MENU| to MY TRAILS|ENT| to trail name|ENT| to
DELETE TRAIL|ENT| to YES|ENT.
Tip:
You can also delete all trails at once:
1. Press
MENU|MENU| to MY TRAILS|ENT.
2. Press to
DELETE ALL|ENT| to YES|ENT.
Edit a Trail Name
To edit a trail name: press
MENU|MENU| to MY TRAILS|ENT| to trail
name|
ENT|ENT. Press or to change the first character, then press
to the next character and repeat until the name is correct. Press
ENT
then EXIT|EXIT|EXIT|EXIT to return to the previous page display.
Figure 4.
Figure 3.
Figure 2.
Figure 1.