Emerson 00825-0100-4716 Marine Instruments User Manual


 
Quick Installation Guide
00825-0100-4716, Rev DA
October 2009
Rosemount 3095 MultiVariable
25
Rosemount 3095 Fieldbus
Hazardous Locations Certifications
North American Certifications
FM Approvals
A Explosion Proof for Class I, Division 1, Groups B, C, and D. Dust-Ignition Proof for Class
II/Class III, Division 1, Groups E, F, and G. Enclosure type NEMA 4X. Factory Sealed.
Provides nonincendive RTD connections for Class I, Division 2, Groups A, B, C, and D.
J Intrinsically Safe for use in Class I, II and III, Division 1, Groups A, B, C, D, E, F, and G
hazardous outdoor locations. Non-incendive for Class I, Division 2, Groups A, B, C, and
D. Temperature Code T4. Factory Sealed.
For input parameters and installation see control drawing 03095-1020.
V FISCO for use in Class I, II and III, Division 1, Groups A, B, C, D, E, F, and G hazardous
outdoor locations. Temperature Code T4. Factory Sealed.
For input parameters and installation see control drawing 03095-1020.
Canadian Standards Association (CSA)
C Explosion Proof for Class I, Division 1, Groups B, C, and D. Dust-Ignition Proof for Class
II/Class III, Division 1, Groups E, F, and G. Factory Sealed. CSA enclosure Type 4X for
indoor and outdoor hazardous locations. Suitable for Class I, Division 2, Groups A, B, C,
and D. Install in accordance with Rosemount Drawing 03095-1024.
K Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D. When installed in
accordance with Rosemount Drawing 03095-1021. Temperature Code T3C.
W FISCO Field Device. Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D.
When installed in accordance with Rosemount Drawing 03095-1021. Temperature Code
T3C.
European Certifications
F/T ATEX Intrinsic Safety Certificate Number:
Baseefa 05ATEX0022X
II 1 G
EEx ia IIC T5 (T
amb
= -45°C to 40°C)
EEx ia IIC T4 (T
amb
= -45°C to 70°C)
1180
Table 8. Connection Parameters (Power/Signal Terminals)
Fieldbus (F Option) FISCO (T Option)
U
i
= 30V U
i
= 17.5V
I
i
= 300 mA I
i
= 380 mA
P
i
= 1.3 W P
i
= 5.32 W
C
i
= 3.3 nF C
i
< 5 nF
L
i
= 0 L
i
= 10 µH