Filter
Top Products
3. SETTING AND ADJUSTMENT
3-13
Antenna height
Select height (m) of the radar antenna unit from the sea surface among 5, 7.5, 10, 15, 20,
25, 30, 35, 40, 45 and “more 50 m”.
Near STC, Mid STC and far STC
Use the default setting. Change the setting if desired according to sea condition.
Ring Suppression
This is mainly used to remove “ring” noise which appears in the waveguide-type radar.
Adjust so the rings disappear at the range of 0.125 nm. The setting range is 0 to 255.
Scanner setting
Open the ”Radar Initialize” menu to show scanner menu.
Radar Initialize